Banner

This is alternative content.

Plastics

Brikgrip D.P.C.

It is an embossed, flexible damp-proof course used to resist rising damp, conduct penetrating rainwater in walls, and resist horizontal penetration of wind-blown rain. It complies with SABS 952-1985 Type B.

It is flexible over a wide temperature range, will not extrude under pressure, resists punctures, and is light and easily handled. It is inert and does not age, rot or decay. The embossing prevents slip and facilitates mortar application.

 

It is used as a damp proof course in the following

  • solid wall construction
  • cavity walls
  • at lintel openings
  • parapet walls

 

Brikgrip DPC General

In solid wall construction the Brikgrip DPC must be at least 3 courses above finished ground level on the inner leaf In cavity construction the Brikgrip DPC must be at least 2 courses above ground level on the inner skin. The cavity below the damp-course must be filled and splayed to the underside of the stepped DPC Under-sill flashing Brikgrip DPC must be well tucked to the underside of the sill component or tacked to the timber sub-frame if wooden windows have been specified. It is preferable to step down one course. At lintels, take Brikgrip DPC to at least 150mm above openings on the inner skin and dress to outer skin over frame. At underside of flat roof slabs, step Brikgrip DPC to the outside. The omission of this detail can lead to chronic inward capillary movement of moisture at the interface of the slab and the brickwork. At reveals, the Brikgrip DPC must cover the brick reveal return and be tacked to the joint of the framing component. Lap and join the lintel level DPC.

 

Brikgrip Advantages

 

Advantages

Available Sizes (375 micron)

Exceeds SABS requirements 110mm x 30m
Will not absorb water 150mm x 30m
Easy to handle 225mm x 30m
Chemically inert 300mm x 30m
Excellent breaking strength 340mm x 30m
Excellent puncture resistance 460mm x 30m
   

Convenient widths Colour coded for on-site identification